Working with Honey Gel

After I took a break from my fluid painting, I started working with this acrylic medium called Honey Gel. It has the consistency of Honey (like the name suggests) but maybe a little thicker. So here goes: I'll start with my pieces and then share my recipe!

 

I found the medium by accident (bought it on a whim) but quickly learned how to use it. Fluid painting taught me a lot that was helpful for it. The long string-like accents on the corners or accenting the composition on my fluid paintings require quick fluid movements (no pun intended) that also move off the canvas. This allows the lines to not have any kinks or strange curves at the end. It means that while going back and forth, a lot of the paint falls outside the canvas. I think the speed of the movement requires the most practice so I recommend painting a piece of cardboard first. You have to go slow enough to allow the paint to flow with no drips but fast enough that the lines are long and smooth with no kinks. I did notice that the speed differed with pouring medium and honey gel and that landed me with some wierd lines at first!

B1AA4BF5-6C18-4513-B87C-5A53EC86BE03.JPG

So the piece below was my first piece with pure honey gel. The lines weren't as delicate as they tend to be with pouring medium so after this I started to experiment with the recipe. But all in all, for a first attempt, I was quite happy with it. 

FullSizeRender.jpg

My next piece was a little more thought out composition-wise. This time I added a little pouring medium to the gel and it was much easier to work with. It still created some wierd puddles (top left corner) so I continued to experiment. This piece glows in the dark too! I added the pigment to the gel and it worked perfectly! 

FullSizeRender.jpg

My first large piece with the honey gel! This was almost a workout to very out-of-shape person (i.e. Me). To keep the movement smooth, I had to stretch and bend across the canvas but I still managed to remove the kinks. I did create a few puddles though. This was because the gel tends to harden if its not well mixed; the lumps then fall out and create puddles. But if you act quickly and scrape towards the line then you can minimize them (if not remove them entirely). In the end, to add an interesting detail I added a very drippy line in the bottom middle section. Here, I didn't bother with smooth movements and just embraced the natural texture of the gel. 

5402D512-700E-4D43-BEAB-450725C8ED4A.JPG

The recipe I ended with finally was a gel, pouring medium, and a mixture of water, pouring medium and flow aid (2:1:1). To create the last mixture, I added a little flow aid and water to an empty pouring medium bottle which cleaned out the rest of the pouring medium and created the perfect combination. Just make sure to mix all the ingredients really well, it takes a few minutes. All three mediums are Liquitex.  

I had so much fun working with this medium to be honest! Check out my instagram for more pictures, and videos! And let me know how it works out for you!
  

Shivani  

A Fluid Art Tutorial

I have recently begun experimenting with Fluid Art and unfortunately discovered that its not as easy as it looks! I'm far from an expert, but here's my simple tutorial. It will probably change in the future, but I'll keep you guys updated!

 

This is a final piece; I'm going to take you through the process.  

Final piece  

Final piece  

1. I first spray a thin coat of varnish on the canvas (make sure it's a stretched canvas) to allow the paint to move across it easily  

2. I then mix the colors I want with flow aid, water and pouring medium. First mix the flow aid and water 20:1. Add this mixture and pouring medium to the paint until you've got enough paint and the drips are continuous streams. Below is more than enough to cover 40x40 cm. 

The paint  

The paint  

3. For this painting I attempted to be more controlled so I poured the paint in a pattern and attempted to spread it without disturbing it. There's no right way to do it, you can pour them all into another cup and pour this, or flip the cup onto it (a dirty cup pour). To spread the paint simply tilt the canvas in what ever direction your want it to fall.  

 

Applying the paint

Applying the paint

Below is what it looked like after I finished pouring and spreading.  

image.jpg

4. I then added more detail by swirling the paint around. If you do it when it's wet the paint will Reform with the pattern you create but if you wait too long or move too much it will create a 'hole' in the surface. You can also use this method to correct any stray drips like the blue drop in the bottom left corner. Lift it out with a straight edge (some cardboard or a chisel tip rubber brush and move the surrounding paint to close over the gap. 

Adding detail

Adding detail

And here is the final piece!! I added more detail almost exclusively in the center.

Final piece

Final piece

I've been watching a lot of tutorials and looking at a lot of fluid art pieces to come up with this technique but I'm still learning! So let me know if you have any suggestions! Comment below!  

Shivani